🎖️GitЯра🎖️
Commit 0ec1a0e844915f13a7152c19e9a67f23065a58d5
Parents : fa2ef1c
Author : James Rich <2199651+jamesarich@users.noreply.github.com>
Signature : Signature validation error
Date : 2026-08-01T09:35:29-05:00
Committer : GitHub <noreply@github.com>
Date : 2026-08-01T09:35:29-05:00
chore: Scheduled updates (Firmware, Hardware, Translations) (#6528)
Changes
2 files changed, 36 insertions(+), 35 deletions(-)
Diff
diff --git a/core/resources/src/commonMain/composeResources/values-bg/strings.xml b/core/resources/src/commonMain/composeResources/values-bg/strings.xml
index 021635fab9..69fa02f17d 100644
--- a/core/resources/src/commonMain/composeResources/values-bg/strings.xml
+++ b/core/resources/src/commonMain/composeResources/values-bg/strings.xml
@@ -80,6 +80,7 @@
<!-- AQI -->
<string name="aqi">AQI</string>
<string name="aqi_good">Добър</string>
+ <string name="aqi_hazardous">Опасно</string>
<string name="aqi_value_with_severity">%1$d (%2$s)</string>
<string name="are_you_sure">Сигурни ли сте?</string>
<string name="are_you_sure_change_default">Сигурни ли сте, че искате да промените канала по подразбиране?</string>
@@ -129,8 +130,8 @@
<string name="channel_3">Канал 3</string>
<string name="channel_4">Канал 4</string>
<string name="channel_5">Канал 5</string>
- <string name="channel_6">Channel 6</string>
- <string name="channel_7">/*Канал 7</string>
+ <string name="channel_6">Канал 6</string>
+ <string name="channel_7">Канал 7</string>
<string name="channel_8">Канал 8</string>
<string name="channel_invalid">URL адресът на този канал е невалиден и не може да се използва</string>
<string name="channel_label">Канал</string>
diff --git a/docs/ru-rRU/user/settings-module-admin.md b/docs/ru-rRU/user/settings-module-admin.md
index a765fe0aa8..692f64a196 100644
--- a/docs/ru-rRU/user/settings-module-admin.md
+++ b/docs/ru-rRU/user/settings-module-admin.md
@@ -89,17 +89,17 @@ Buffers messages for nodes that were temporarily offline, then replays them when
> 💡 **Tip:** Store and Forward works best on nodes with ample memory (ESP32 with PSRAM). Router nodes are ideal candidates since they're typically always-on.
-### Range Test Module
+### Модуль проверки дальности
-Automated range testing tool for evaluating link quality between nodes. When enabled, the node periodically transmits test messages with incrementing counters. A receiver node logs these messages, allowing you to walk or drive away and later analyze at what distance messages stopped arriving.
+Автоматизированный инструмент для проверки дальности и оценки качества связи между нодами. Когда включено, нода периодически отправляет сообщения с увеличивающимся счетчиком. Приёмная нода записывает эти сообщения, что позволяет тебе уйти пешком или уехать на машине, а потом проанализировать, на каком расстоянии сообщения перестали приходить.
-| Настройка | Описание |
-| -------------------------------------- | --------------------------------- |
-| Включено | Activate range testing |
-| Sender Interval (s) | Time between test transmissions |
-| Save CSV | Log received test data to SD card |
+| Настройка | Описание |
+| ---------------------------------------- | --------------------------------- |
+| Включено | Активировать проверку дальности |
+| Интервал отправки (с) | Время между передачами проверок |
+| Сохранить в CSV | Log received test data to SD card |
-### Telemetry Module
+### Модуль телеметрии
Controls what telemetry data your node shares with the mesh. Telemetry includes device health (battery, uptime) and environmental sensor data (temperature, humidity, pressure).
@@ -112,7 +112,7 @@ Controls what telemetry data your node shares with the mesh. Telemetry includes
See [Telemetry & Sensors](telemetry-and-sensors) for supported sensors and configuration recommendations.
-### Canned Message Module
+### Модуль шаблонных сообщений
Pre-configured messages accessible from the device's physical buttons (for radios with rotary encoders, keypads, or similar input hardware). Define a list of quick-send messages that can be transmitted without a phone connected — ideal for field use.
@@ -124,7 +124,7 @@ Pre-configured messages accessible from the device's physical buttons (for radio
| Rotary Encoder | Enable rotary encoder input |
| Up/Down/Press Pins | GPIO pin assignments for input |
-### Audio Module
+### Звуковой модуль
Codec2 audio support for low-bandwidth voice communication over the mesh. This is an **experimental** feature that encodes voice into very small data packets using the Codec2 codec.
@@ -142,27 +142,27 @@ Codec2 audio support for low-bandwidth voice communication over the mesh. This i
GPIO control over the mesh network. Allows a remote node to read or write GPIO pins on another node — useful for activating relays, reading switches, or controlling external hardware from a distance.
-| Настройка | Описание |
-| -------------------- | --------------------------------------------------------------- |
-| Включено | Activate remote GPIO access |
-| Allow Undefined Pins | Allow access to any GPIO pin (security risk) |
-| Available Pins | Up to 4 GPIO pins this node exposes for remote read/write |
+| Настройка | Описание |
+| ----------------------------- | ------------------------------------------------------------------------------ |
+| Включено | Activate remote GPIO access |
+| Разрешить неопределенные пины | Разрешить доступ к любому GPIO-пину (риск для безопасности) |
+| Доступные пины | Up to 4 GPIO pins this node exposes for remote read/write |
-> ⚠️ **Warning:** Enabling "Allow Undefined Pins" gives remote nodes access to all GPIO pins, which could interfere with the radio's own hardware. Only enable on dedicated GPIO nodes.
+> ⚠️ **Warning:** Enabling "Allow Undefined Pins" gives remote nodes access to all GPIO pins, which could interfere with the radio's own hardware. Включать только на выделенных GPIO-нодах.
-### Neighbor Info Module
+### Модуль информации о соседях
Broadcasts information about directly heard neighbors, enabling mesh topology mapping. Each enabled node periodically shares a list of the other nodes it can hear and their signal quality.
-| Настройка | Описание |
-| -------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------ |
-| Включено | Activate neighbor broadcasting |
-| Update Interval (s) | How often to broadcast neighbor list |
-| Transmit Over LoRa | Also broadcast neighbor info over LoRa, not just MQTT/phone. Unavailable on a channel using the default key and name |
+| Настройка | Описание |
+| ------------------------------------------ | ------------------------------------------------------------------------------------------------------------------------------------ |
+| Включено | Activate neighbor broadcasting |
+| Интервал обновления (с) | How often to broadcast neighbor list |
+| Передача через LoRa | Also broadcast neighbor info over LoRa, not just MQTT/phone. Unavailable on a channel using the default key and name |
See [Discovery](discovery) for how to use neighbor data for mesh topology exploration.
-### Ambient Lighting Module
+### Модуль окружающего освещения
Controls onboard NeoPixel or other addressable RGB LEDs on supported hardware. Can be used for visual status indicators, notification lights, or decorative effects.
@@ -206,12 +206,12 @@ Team Awareness Kit integration for interoperability with ATAK and WinTAK. See [T
### Удаленное администрирование
-Remotely configure nodes that share your admin key:
+Удалённо настраивай ноды, которые используют твой ключ администрирования:
-1. Select the target node in the node list.
-2. Navigate to **Settings** for that node.
-3. Modify configuration.
-4. Tap **Save** — changes are sent over the mesh.
+1. Выбери целевую ноду в списке нод.
+2. Перейди в **Настройки** этой ноды.
+3. Измени конфигурацию.
+4. Нажми **Сохранить** — изменения отправляются через сеть.
> ⚠️ **Requires:** Admin key configured on both your node and the target node.
@@ -219,9 +219,9 @@ Remotely configure nodes that share your admin key:
Removes stale nodes from your local database that haven't been heard in a configurable time window.
-### Factory Reset
+### Сброс к заводским настройкам
-Resets all settings to factory defaults. **This cannot be undone.**
+Сбрасывает все настройки к заводским. **Это действие нельзя отменить.**
### Перезагрузка
@@ -234,10 +234,10 @@ Opens the **Packets** and **App logs** tabs for viewing, filtering, and exportin
### Troubleshooting Remote Admin
- **"No response from target node"** — the target may be out of range, offline, or have a mismatched admin key. Verify the admin key matches on both nodes.
-- **Changes not applying** — some settings require a reboot to take effect. Try the Reboot action after saving.
-- **Can't see remote settings** — ensure your node has the admin key for the target node. The admin channel is configured automatically when an admin key is set.
+- **Изменения не применены** — чтобы некоторые настройки вступили в силу, нужно перезагрузить устройство. Попробуй перезагрузить после сохранения.
+- **Не видны настройки удалённой ноды** — убедись, что твоя нода имеет админ-ключ для целевой ноды. Админ-канал настраивается автоматически, когда задан ключ администратора.
-## Related Topics
+## Связанные темы
- [Settings — Radio & User](settings-radio-user) — core radio and user profile settings
- [Module configuration reference](https://meshtastic.org/docs/configuration/module) — detailed module docs on meshtastic.org
Served by rngit 1.5.2 - Generated in 0.07s